|
'Basic XL300' 90° Swing, Telescoped, with Rock Spike
With the 90° Swing, Telescoping Offset Positioning, 4-Way Tilt & Hydraulic Center Leg Adjustment, Driving Posts on the Fence Center-Line is Efficient & Hassle Free, Eliminating the Need for (Repeatedly) Repositioning your Tractor for Precise Positioning. The 110,000lb’s of Hammering Force also Contributes to Efficiency & Straight Posts, Even in the Toughest Ground Conditions. For the Worst Ground Conditions, an Optional Rock Spike is available - WRAG Drivers include the Extra Spool Valve & Mounting Lugs (for the Rock Spike & Extractor) as Standard Features. The 'Basic XL300’ Driver includes the following Standard Features:
- Hydraulic Mast Positioning:
- 90° Swing, from Rear Center to Right, Infinite Positioning.
- Telescoping Boom, Horizontal, up to 15” w/Infinite Positioning.
- Functional Anywhere in the 90° Swing.
- 'Front to Rear' & 'Left to Right' Tilt!
- Hydraulic Center Leg Adjustment.
- Open Frame Design:
- Provides maximum efficiency, versatility & flexibility, on any terrain, for positioning the Post to be as straight as possible!
- Allows adding new posts into existing fence lines without contacting & damaging the existing fence wires!
- Allows Driving Posts as Low as 6” Above Grade!
- Self-Contained Hydraulic System:
- Eliminates the clumsy & costly Return Line Kit (a nuisance to add & remove & route to the reservoir filler neck)!
- Eliminates the risk of discharging hydraulic oil all over the back of Tractor (from the Return Line Kit)!
- Without the need of a model specific Return Line Kit, this Driver is universal to use on any make & model of Tractor!
- 110,000lb's of (Springless) Drop Hammer Pounding Force:
- The Drop Hammer System provides Springless Driving Energy, eliminating daily maintenance (seasoning), and the potential disruption & expense associated with Spring failures!
- WRAG's Drop Hammer System uses an Industrial Poly & Cotton Braided Rope, which is very easy on your hands & won’t kink, or fray, offering a trouble free service life!
- Hinged 'Arm' for the Drop Hammer Operation:
- Hinged 'Arms' are superior to Hinged ‘Masts’, which are a nuisance to set-up, require more pulleys & increases maintenance, and contributes to a loss of driving force!
- Flow Control Valve:
- Used to reduce the Hinged Arm cycle time for smoother operation, or to speed it up for faster operation (once you’re able to throttle & feather the controls)!
- Cat 2 Quick-Hitch Compatibility!
- Controls Located for Maximum Safety & Ergonomic Convenience!
|
|
'Basic XL300' 90° Swing, Telescoped, with Rock Spike
|
|
'Basic XL300' Centered, Telescoped, w/Rock Spike
|
'Basic XL300' Centered, Telescoped, w/Rock Spike
|
|
'Basic XL300' 90° Swing, Telescoping Retracted, w/Rock Spike
|
'Basic XL300' 90° Swing, Telescoped, w/Rock Spike
|
|
'Basic XL300' 90° Swing, Fully Telescoped, w/Rock Spike
'Basic XL300' Centered, Telescoped, w/Rock Spike
|
|
'Basic XL300' Centered, Retracted, Tilted Forward
|
'Basic XL300' Centered, Retracted, Tilted Forward
|
|
'Basic XL300' Centered, Telescoping Retracted, Tilted Back
|
'Basic XL300' Centered, Telescoping Retracted, Tilted Back
|
|
'Basic XL300' Centered, Telescoping Retracted, Tilted Left
|
'Basic XL300' Centered, Telescoping Retracted, Tilted Right
|
|
'Basic XL300' 90° Swing, Telescoped, Tilted Left, w/Rock Spike
|
'Basic XL300' 90° Swing, Telescoped, Tilted Right, w/Rock Spike
|
|
'Basic XL300' Centered, Telescoping Retracted, w/Rock Spike
|
'Basic XL300' Centered, Telescoped, w/Rock Spike
|
|
'Basic XL300' Telescoping Cylinder Retracted
|
'Basic XL300' Telescoping Cylinder Extended
|
|
'Basic XL300' Hydraulic Control Levers
|
|
'Basic XL300' Optional Rock Spike & Extractor Kit
|
'Basic XL300' Optional Wire Unroller
|
|
|
| 'BASIC XL300' 3-POINT POST DRIVER |
| Max. Post Length w/36" Legs Fully Extended |
9'-0" Post (Drives down to 30" Above Grade) (*/**) |
| Max. Post Length w/Legs Fully Retracted |
8'-0" Post (Drives down to 18" Above Grade) (*/**) |
| Max. Post Diameter |
10" |
| Drop Hammer Weight |
660 lbs. |
| Driving Force |
110,000 lbs. @ Full Stroke |
| Mast Length |
10'-8" w/Legs Retracted |
| Hydraulic Tilt |
22° Left & Right, Front & Rear |
| Hydraulic Swing |
90° (Infinite Positioning) |
| Hydraulic Telescoping |
15" Travel (Infinite Positioning) |
| Hydraulic Requirement |
Min 12GPM/1800PSI |
| Hydraulic Systems |
Open Center
(Plugs for Closed & Load Sensing Available) |
| Weight |
1,940 lbs. |
| 3-Point Hitch |
Double Clevis, CAT 2
Double Top Link Lugs for Quick Hitch Compatibility.
Not Suitable for Cat 1 Tractors! |
NOTES:
*Dimensions are Conservative & Subject to Variation Based on Tractor 3-Point & Tire Sizes.
**Dimensions are as Measured on a 75HP Tractor w/30" Rear Tires. |
